Enhancing pectin extraction from orange peel through citric acid-assisted optimization based on a dual response.

Pectin is widely used in several products in the industry. Conventionally, strong and harmful acids are used for its extraction. This study optimized the extraction of orange peel's pectin using citric acid, considering yield and degree of esterification (DE) as response variables. Proximal analyses were performed, and the samples were subjected to a Box-Behnken design on three central points, considering as variables the temperature, time, and pH. The results of proximate analyses of the orange peels revealed 11.76 % moisture content, 87.26 % volatiles, 0.09 % ash, 50.45 % soluble carbohydrates, 70.60 % total carbohydrates, 0.89 % fixed carbon, 5.35 % lipids, and 36.75 mg GAE/g of phenolic compounds. The resulting second-order polynomial model described the relation of the input and output variables related to each other. The best performance to obtain a higher yield (18.18 %) of high methoxyl pectin (DE 50 %) was set at 100 °C/30 min/pH 2.48. Pectin showed antioxidant properties by ABTS and DPPH assays and similar thermal properties to the commercial polymer. Its equivalent weight was 1219.51 mol/g, and the methoxyl and anhydrouronic acid were 2.23 and 67.10 %, respectively. Hence, pectin extraction with citric acid results in a high-quality polymer and could be used as a gelling agent, stabilizer, or texturizer in food products.

Nano and Technological Frontiers as a Sustainable Platform for Postharvest Preservation of Berry Fruits.

Berries are highly perishable and susceptible to spoilage, resulting in significant food and economic losses. The use of chemicals in traditional postharvest protection techniques can harm both human health and the environment. Consequently, there is an increasing interest in creating environmentally friendly solutions for postharvest protection. This article discusses various approaches, including the use of "green" chemical compounds such as ozone and peracetic acid, biocontrol agents, physical treatments, and modern technologies such as the use of nanostructures and molecular tools. The potential of these alternatives is evaluated in terms of their effect on microbial growth, nutritional value, and physicochemical and sensorial properties of the berries. Moreover, the development of nanotechnology, molecular biology, and artificial intelligence offers a wide range of opportunities to develop formulations using nanostructures, improving the functionality of the coatings by enhancing their physicochemical and antimicrobial properties and providing protection to bioactive compounds. Some challenges remain for their implementation into the food industry such as scale-up and regulatory policies. However, the use of sustainable postharvest protection methods can help to reduce the negative impacts of chemical treatments and improve the availability of safe and quality berries.

Microencapsulation of Gallic Acid Based on a Polymeric and pH-Sensitive Matrix of Pectin/Alginate.

The encapsulation of gallic acid (GA) through several methods has enhanced its shelf life and facilitated industrial applications. Polymeric matrices made of alginate and pectin were evaluated to encapsulate GA via spray drying. The pH-responsive release mechanism was monitored to validate the matrices' performances as wall materials and extend the bioactive compound stability. The microcapsules produced were characterized via scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), and cyclic voltammetry (CV). The retention and encapsulation efficiency ranges were 45-82% and 79-90%, respectively. The higher values were reached at 3 and 0.75% (w/v) pectin and sodium alginate, respectively. The scanning electron microscopy showed smooth spherical capsules and the average particle size ranged from 1327 to 1591 nm. Their performance and stability were evaluated with optimal results at a pH value of 7 throughout the investigation period. Therefore, this work demonstrated the suitability of gallic acid encapsulation via spray drying using pectin and alginate, which are biopolymers that can be obtained from circular economy processes starting from agro-industrial biomass. The developed formulations provide an alternative to protecting and controlling the release of GA, promoting its application in the food, pharmaceutical, and cosmetic industries and allowing for the release of compounds with high bioactive potential.

Polysaccharides from the Sargassum and Brown Algae Genus: Extraction, Purification, and Their Potential Therapeutic Applications.

Brown macroalgae represent one of the most proliferative groups of living organisms in aquatic environments. Due to their abundance, they often cause problems in aquatic and terrestrial ecosystems, resulting in health problems in humans and the death of various aquatic species. To resolve this, the application of Sargassum has been sought in different research areas, such as food, pharmaceuticals, and cosmetics, since Sargassum is an easy target for study and simple to obtain. In addition, its high content of biocompounds, such as polysaccharides, phenols, and amino acids, among others, has attracted attention. One of the valuable components of brown macroalgae is their polysaccharides, which present interesting bioactivities, such as antiviral, antimicrobial, and antitumoral, among others. There is a wide variety of methods of extraction currently used to obtain these polysaccharides, such as supercritical fluid extraction (SFE), pressurized liquid extraction (PLE), subcritical water extraction (SCWE), ultrasound-assisted extraction (UAE), enzyme-assisted extraction (EAE), and microwave-assisted extraction (MAE). Therefore, this work covers the most current information on the methods of extraction, as well as the purification used to obtain a polysaccharide from Sargassum that is able to be utilized as alginates, fucoidans, and laminarins. In addition, a compilation of bioactivities involving brown algae polysaccharides in in vivo and in vitro studies is also presented, along with challenges in the research and marketing of Sargassum-based products that are commercially available.

Occurrence, transport, and detection techniques of emerging pollutants in groundwater.

Emerging pollutants (EPs) are a group of different contaminants, such as hormones, pesticides, heavy metals, and drugs, usually found in concentrations between the order of ng and µg per liter. The global population's daily city and agro-industrial activities release EPs into the environment.  Due to the chemical nature of EPs and deficient wastewater treatment and management, they are transported to superficial and groundwater through the natural water cycle, where they can potentially cause harmful effects on living organisms. Recent efforts have focused on developing technology that allows EPs quantification and monitoring in real-time and in situ. The newly developed technology aims to provide accessible groundwater management that detects and treats EPs while avoiding their contact with living beings and their toxic effects. This review presents some of the recently reported techniques that have been applied to advance the detection of EPs in groundwater and potential technologies that can be used for EP removal.

Environmental concerns and bioaccumulation of psychiatric drugs in water bodies - Conventional versus biocatalytic systems of mitigation.

The COVID-19 pandemic has brought increments in market sales and prescription of medicines commonly used to treat mental health disorders, such as depression, anxiety, stress, and related problems. The increasing use of these drugs, named psychiatric drugs, has led to their persistence in aquatic systems (bioaccumulation), since they are recalcitrant to conventional physical and chemical treatments typically used in wastewater treatment plants. An emerging environmental concern caused by the bioaccumulation of psychiatric drugs has been attributed to the potential ecological and toxicological risk that these medicines might have over human health, animals, and plants. Thus, by the application of biocatalysis-assisted techniques, it is possible to efficiently remove psychiatric drugs from water. Biocatalysis, is a widely employed and highly efficient process implemented in the biotransformation of a wide range of contaminants, since it has important differences in terms of catalytic behavior, compared to common treatment techniques, including photodegradation, Fenton, and thermal treatments, among others. Moreover, it is noticed the importance to monitor transformation products of degradation and biodegradation, since according to the applied removal technique, different toxic transformation products have been reported to appear after the application of physical and chemical procedures. In addition, this work deals with the discussion of differences existing between high- and low-income countries, according to their environmental regulations regarding waste management policies, especially waste of the drug industry.

Revalorization of Microalgae Biomass for Synergistic Interaction and Sustainable Applications: Bioplastic Generation.

Microalgae and cyanobacteria are photosynthetic microorganisms' sources of renewable biomass that can be used for bioplastic production. These microorganisms have high growth rates, and contrary to other feedstocks, such as land crops, they do not require arable land. In addition, they can be used as feedstock for bioplastic production while not competing with food sources (e.g., corn, wheat, and soy protein). In this study, we review the macromolecules from microalgae and cyanobacteria that can serve for the production of bioplastics, including starch and glycogen, polyhydroxyalkanoates (PHAs), cellulose, polylactic acid (PLA), and triacylglycerols (TAGs). In addition, we focus on the cultivation of microalgae and cyanobacteria for wastewater treatment. This approach would allow reducing nutrient supply for biomass production while treating wastewater. Thus, the combination of wastewater treatment and the production of biomass that can serve as feedstock for bioplastic production is discussed. The comprehensive information provided in this communication would expand the scope of interdisciplinary and translational research.

Correlating blast vibrations and geomechanical properties to determine damage profiles and improve wall conditions in open pit mining.

Slope stability is one of the biggest concerns for mining practices and to consider the rock mass response over blasting is fundamental to achieve pit geometry. This study consists in developing a methodology which connects the dynamic behavior of one lithological domain to blast designs applied at a copper mine. The central element of this study was the construction of vibration attenuation and seed wave model which, in conjunction with geomechanical properties, has allowed the characterization of this particular rock mass and the vibration attenuation phenomena. The new blast design was developed from the model simulations, once it was possible to recognize which parameters of the blast design affect most of the damage induced by blasting. To guarantee model representativeness, two blast tests were conducted: one with the usual blast design and another using the new one. Furthermore, holes were drilled behind the blasts, which were inspected before and after each blast to compare the produced fracturing with the fracturing expected by the model. The results obtained in these blast tests show a strong correlation between the modeled and the real. The modeling proved to be a useful tool providing manners to stablish a blast design, which generates stable walls.

Expanding the Scope of Nanobiocatalysis and Nanosensing: Applications of Nanomaterial Constructs.

The synergistic interaction between advanced biotechnology and nanotechnology has allowed the development of innovative nanomaterials. Those nanomaterials can conveniently act as supports for enzymes to be employed as nanobiocatalysts and nanosensing constructs. These systems generate a great capacity to improve the biocatalytic potential of enzymes by improving their stability, efficiency, and product yield, as well as facilitating their purification and reuse for various bioprocessing operating cycles. The different specific physicochemical characteristics and the supramolecular nature of the nanocarriers obtained from different economical and abundant sources have allowed the continuous development of functional nanostructures for different industries such as food and agriculture. The remarkable biotechnological potential of nanobiocatalysts and nanosensors has generated applied research and use in different areas such as biofuels, medical diagnosis, medical therapies, environmental bioremediation, and the food industry. The objective of this work is to present the different manufacturing strategies of nanomaterials with various advantages in biocatalysis and nanosensing of various compounds in the industry, providing great benefits to society and the environment.

Recent Advances in Prodigiosin as a Bioactive Compound in Nanocomposite Applications.

Bionanocomposites based on natural bioactive entities have gained importance due to their abundance; renewable and environmentally benign nature; and outstanding properties with applied perspective. Additionally, their formulation with biological molecules with antimicrobial, antioxidant, and anticancer activities has been produced nowadays. The present review details the state of the art and the importance of this pyrrolic compound produced by microorganisms, with interest towards Serratia marcescens, including production strategies at a laboratory level and scale-up to bioreactors. Promising results of its biological activity have been reported to date, and the advances and applications in bionanocomposites are the most recent strategy to potentiate and to obtain new carriers for the transport and controlled release of prodigiosin. Prodigiosin, a bioactive secondary metabolite, produced by Serratia marcescens, is an effective proapoptotic agent against bacterial and fungal strains as well as cancer cell lines. Furthermore, this molecule presents antioxidant activity, which makes it ideal for treating wounds and promoting the general improvement of the immune system. Likewise, some of the characteristics of prodigiosin, such as hydrophobicity, limit its use for medical and biotechnological applications; however, this can be overcome by using it as a component of a bionanocomposite. This review focuses on the chemistry and the structure of the bionanocomposites currently developed using biorenewable resources. Moreover, the work illuminates recent developments in pyrrole-based bionanocomposites, with special insight to its application in the medical area.

Effects of UV and UV-vis Irradiation on the Production of Microalgae and Macroalgae: New Alternatives to Produce Photobioprotectors and Biomedical Compounds.

In the last decade, algae applications have generated considerable interest among research organizations and industrial sectors. Bioactive compounds, such as carotenoids, and Mycosporine-like amino acids (MAAs) derived from microalgae may play a vital role in the bio and non-bio sectors. Currently, commercial sunscreens contain chemicals such as oxybenzone and octinoxate, which have harmful effects on the environment and human health; while microalgae-based sunscreens emerge as an eco-friendly alternative to provide photo protector agents against solar radiation. Algae-based exploration ranges from staple foods to pharmaceuticals, cosmetics, and biomedical applications. This review aims to identify the effects of UV and UV-vis irradiation on the production of microalgae bioactive compounds through the assistance of different techniques and extraction methods for biomass characterization. The efficiency and results focus on the production of a blocking agent that does not damage the aquifer, being beneficial for health and possible biomedical applications.

Fungal Proteins from Sargassum spp. Using Solid-State Fermentation as a Green Bioprocess Strategy.

The development of green technologies and bioprocesses such as solid-state fermentation (SSF) is important for the processing of macroalgae biomass and to reduce the negative effect of Sargassum spp. on marine ecosystems, as well as the production of compounds with high added value such as fungal proteins. In the present study, Sargassum spp. biomass was subjected to hydrothermal pretreatments at different operating temperatures (150, 170, and 190 °C) and pressures (3.75, 6.91, and 11.54 bar) for 50 min, obtaining a glucan-rich substrate (17.99, 23.86, and 25.38 g/100 g d.w., respectively). The results indicate that Sargassum pretreated at a pretreatment temperature of 170 °C was suitable for fungal growth. SSF was performed in packed-bed bioreactors, obtaining the highest protein content at 96 h (6.6%) and the lowest content at 72 h (4.6%). In contrast, it was observed that the production of fungal proteins is related to the concentration of sugars. Furthermore, fermentation results in a reduction in antinutritional elements, such as heavy metals (As, Cd, Pb, Hg, and Sn), and there is a decrease in ash content during fermentation kinetics. Finally, this work shows that Aspergillus oryzae can assimilate nutrients found in the pretreated Sargassum spp. to produce fungal proteins as a strategy for the food industry.

Micro-algae assisted green bioremediation of water pollutants rich leachate and source products recovery.

Water management and treatment are high concern fields with several challenges due to increasing pollutants produced by human activity. It is imperative to find integral solutions and strategic measures with robust remediation. Landfill leachate production is a high concern emerging problem. Especially in low middle-income countries due to no proper local waste disposition regulation and non-engineered implemented methods to dispose of urban waste. These landfills can accumulate electronic waste and release heavy metals during the degradation process. Similar phenomena include expired pharmaceuticals like antibiotics. All these pollutants accumulated in leachate made it hard to dispose of or treat. Leachate produced in non-engineered landfills can permeate soils and reach groundwater, dragging different contaminants, including antibiotics and heavy metals, which eventually can affect the environment, changing soil properties and affecting wildlife. The presence of antibiotics in the environment is a problem with particular interest to solve, mainly to avoid the development of antibiotic-resistant microorganisms, which represent a future risk for human health with possible epidemic implications. It has been reported that the use of contaminated water with heavy metals to produce and grow vegetables is a risk for consumers, heavy metals effects in humans can include carcinogenic induction. This work explores the opportunities to use leachate as a source of nutrients to grow microalgae. Microalgae stand out as an alternative to bioremediate leachate, at the same time, microalgae produce high-value compounds that can be used in bioplastic, biofuels, and other industrial applications.

Towards a Circular Economy of Plastics: An Evaluation of the Systematic Transition to a New Generation of Bioplastics.

Plastics have become an essential part of the modern world thanks to their appealing physical and chemical properties as well as their low production cost. The most common type of polymers used for plastic account for 90% of the total production and are made from petroleum-based nonrenewable resources. Concerns over the sustainability of the current production model and the environmental implications of traditional plastics have fueled the demand for greener formulations and alternatives. In the last decade, new plastics manufactured from renewable sources and biological processes have emerged from research and have been established as a commercially viable solution with less adverse effects. Nevertheless, economic and legislative challenges for biobased plastics hinder their widespread implementation. This review summarizes the history of plastics over the last century, including the most relevant bioplastics and production methods, the environmental impact and mitigation of the adverse effects of conventional and emerging plastics, and the regulatory landscape that renewable and recyclable bioplastics face to reach a sustainable future.

Prospecting carbon-based nanomaterials for the treatment and degradation of endocrine-disrupting pollutants.

The presence of endocrine-disrupting chemicals (EDCs) in water resources has significant negative implications for the environment. Traditional technologies implemented for water treatment are not completely efficient for removing EDCs from water. Therefore, research on sustainable remediation has been mainly directed to novel decontamination approaches including nano-remediation. This emerging technology employs engineered nanomaterials to clean up the environment quickly, efficiently, and sustainably. Thus, nanomaterials have contributed to a wide variety of remediation techniques like adsorption, filtration, coagulation/flocculation, and so on. Among the vast diversity of decontamination technologies catalytic advanced oxidation processes (AOPs) outstand as simple, clean, and efficient alternatives. A vast diversity of catalysts has been developed demonstrating high efficiencies; however, the search for novel catalysts with enhanced performances continues. In this regard, nanomaterials used as nanocatalysts are exhibiting enhanced performances on AOPs due to their special nanostructures and larger specific surface areas. Therefore, in this review we summarize, compare, and discuss the recent advances on nanocatalysts, catalysts doped with metal-based nanomaterials, and catalysts doped with carbon-based nanomaterials on the degradation of EDCs. Finally, further research opportunities are identified and discussed to achieve the real application of nanomaterials to efficiently degrade EDCs from water resources.

Enzyme-mimicking capacities of carbon-dots nanozymes: Properties, catalytic mechanism, and applications - A review.

Nanozymes, novel engineered nanomaterial-based artificial enzymes, have been developed to overcome intrinsic drawbacks exist in natural enzymes including high-cost storage, structural instability, and chemical sensitivity. More recently, carbon dots (CDs) have received significant attention due to their biocompatibility, high catalytic activity, and simple surface functionalization, thus emerging as possible alternatives for biomedical and environmental applications. In this review, we analyze methods and precursors used to synthesize CDs with enzyme-mimicking behaviors. In addition, approaches such as doping or constructing hybrid nanozymes are included as possible strategies to enhance the catalytic performance of CDs. Recent studies have reported CDs that mimic different oxidoreductases, exhibiting peroxidase-, catalase-, oxidase/laccase-, and superoxide dismutase-like activities. Therefore, this review presents a detailed discussion of the mechanism, recent advances, and application for each oxidoreductase-like activity reported on nanozymes based on CDs nanomaterials. Finally, current challenges faced in the successful translation of CDs to potential applications are addressed to suggest research directions.

Determinação do limiar anaeróbio pela carga crítica superestima teste de lactato mínimo / Determination the anaerobic threshold for critical workload overestimates lactate minimum test

Introdução: A utilização de métodos específicos de mensuração é de fundamental importância para a identificação da capacidade aeróbia e prescrição da intensidade de exercício. Normalmente esta definição é feita pela determinação do limiar anaeróbio (Lan) que corresponde à máxima fase estável entre produção e remoção de lactato sanguíneo (MFEL). Dentre as mais variadas formas de se det ermin ar a MFEL estão os testes de lactato mínimo (LM) e carga crítica (CC). No entanto, não se sabe se a utilização dessas formas de avaliação pode acarretar em resultados distintos. Objetivo: O objetivo do presente estudo foi comparar os valores de Lan obtidos por meio dos testes de CC e de LM em rat o s W istar. Método : Foram utilizados 32 ratos machos (Wistar), com peso médio 411,0 (± 4 0 ,7 gramas), o s quais fo ram submetidos às baterias de testes de CC e de LM. O teste de LM foi realizado com a indução à hiperlactacidemia com dois estímulos correspondentes a 13% do peso corporal (PC), seguido de intervalo passivo de nove minutos e teste incremental composto por estágios com duração de cin co m inut os e cargas equivalentes a 4.0, 4.5, 5.0, 5.5, 6.0 e 7.0 % do PC. Já a CC foi obtida p o r m eio da in dução ao exercício em quatro diferentes estímulos randomizados, com cargas correspondentes a 7, 9, 11 e 1 3 % do PC. Resultados: Os resultados demonstraram que o Lan médio determinado pelo Teste de CC foi de 5,8 ± 1,2% do peso corporal (PC) e 4,9 ± 0,6% do PC determinado pelo Teste de LM. Co nclusão: P ode ­ se concluir que o limiar anaeróbio determinado por meio do teste CC superestimou em 18,4% o valor obtido por meio do teste de LM...(AU)

Introduction: The utilization of specific measurement methods is of fundamental importance for the identification of aerobic capacity and prescription of exercise. This determination is usually m ade through measurement of the anaerobic threshold (Lan) which corresponds to the maximal lactate st eady state (MLSS). Among the more varied forms of determination of MLSS are the minimum lactate (LM) and critical overload tests (CC). However, it is not known if the utilization of these forms o f ev aluatio n can lead to different results. Objective: The aim of this study was to compare the Lan v alues o btained through the CCand LM tests in Wistar rats. Method: For this purpose, 32 male Wistar rats were used, with an average weight of 411.0 ± 40.7 grams, submitted to CC and LM tests. The LM test was performed fo r the induction of a hyperlactacidemia with two stimuli corresponding to 13% of body weight (BW), followed by a passive interval of nine minutes and an incremental test composed of stages with a duratio n of five minutes and loads equivalent to 4.0, 4.5, 5.0, 5.5, 6.0, and 7.0% of BW . T he CC was o bt ain ed through induced exercise in four randomized stimuli, with loads corresponding to 7, 9 , 1 1, and 1 3 % o f BW. Results: It was observed that the mean anaerobic threshold determined by CC was 5.8 ± 1 .2 % BW , and determined by LM was 4.9 ± 0.6% BW. Conclusion: It is concluded that th e an aero bic th resho ld determined through the critical workload test overestimates the value obtained through the lactate minimum test by 18.4%, thus impeding its use as an aerobic training intensity predictor in Wistar rats. Keywords: Lactic acid, Critical load, Anaerobic threshold, Wistar rats...(AU)

Physicochemical/photophysical characterization and angiogenic properties of Curcuma longa essential oil.

This study analyzed the physicochemical and photophysical properties of essential oil of Curcuma longa and its angiogenic potential. The results showed that curcumin is the main fluorescent component present in the oil, although the amount is relatively small. The experimental chorioallantoic membrane model was used to evaluate angiogenic activity, showing a significant increase in the vascular network of Curcuma longa and positive control groups when compared to the neutral and inhibitor controls (P <0.05), but no significant difference was found between Curcuma longa essential oil and the positive control (P >0.05). Histological analysis showed extensive neovascularization, hyperemia and inflammation in the positive control group and Curcuma longa when compared to other controls (P <0.05), characteristic factors of the angiogenesis process. In conclusion, Curcuma longa oil showed considerable proangiogenic activity and could be a potential compound in medical applications.

Production of curcuminoids from tyrosine by a metabolically engineered Escherichia coli using caffeic acid as an intermediate.

Curcuminoids are phenylpropanoids with high pharmaceutical potential. Herein, we report an engineered artificial pathway in Escherichia coli to produce natural curcuminoids through caffeic acid. Arabidopsis thaliana 4-coumaroyl-CoA ligase and Curcuma longa diketide-CoA synthase (DCS) and curcumin synthase (CURS1) were used to produce curcuminoids and 70 mg/L of curcumin was obtained from ferulic acid. Bisdemethoxycurcumin and demethoxycurcumin were also produced, but in lower concentrations, by feeding p-coumaric acid or a mixture of p-coumaric acid and ferulic acid, respectively. Additionally, curcuminoids were produced from tyrosine through the caffeic acid pathway. To produce caffeic acid, tyrosine ammonia lyase from Rhodotorula glutinis and 4-coumarate 3-hydroxylase from Saccharothrix espanaensis were used. Caffeoyl-CoA 3-O-methyltransferase from Medicago sativa was used to convert caffeoyl-CoA to feruloyl-CoA. Using caffeic acid, p-coumaric acid or tyrosine as a substrate, 3.9, 0.3, and 0.2 mg/L of curcumin were produced, respectively. This is the first time DCS and CURS1 were used in vivo to produce curcuminoids and that curcumin was produced by feeding tyrosine. We have shown that curcumin can be produced using a pathway involvoing caffeic acid. This alternative pathway represents a step forward in the heterologous production of curcumin using E. coli.